Peacekeeper® P3 VS

£125.00

View Cart

Dual Use – Public Order/Patrol Boot – CE Approved for Use in Violent Situations - BS7971-5 (Type 2, Level 3)

Peacekeeper® P3 VS

Type 2, Level 3

S3, HRO, WRU & FRU

Peacekeeper P3VS is a dual use public order/patrol boot – based on Altberg’s best selling safety boot, the P3 Original, the specification has been changed to meet the requirements for the Public Order Standard BS7971-5 (Type 2, Level 3), and meets the S3 rating including anti-static properties.

The sole is ideal for use in urban environments and is tested to pass the higher slip resistance requirements. The Cambrelle lining is breathable and will remain comfortable during periods of prolonged use. By comparison with other makes of public order boots, the P3 is relatively lightweight and the P3 design is tried and tested for all day comfort.

This boot is issued on contract to some of the North West Region Police Forces.

The Peacekeeper P3 VS is available as a factory stock boot, sizes UK 4 ½ - 14, in medium and wide fittings. The boot is Zero rated for VAT because it is a full safety boot.

Protection: Steel Toecap, Steel Midsole

Leather: Full grain, water repellent, first grade 2.2-2.4mm thickness

Lining: Cambrelle® all season, comfort, non-waterproof

Midsole: 2-3 season, light flex – will ‘bed in’ with use

Sole: Eurosole® rubber, dual density – urban use – tested to BS7971-5 for slip resistance levels SRA, SRB and SRC

Sizes: UK 4 ½ – 14 (including ½ sizes) *Please note, for size 14 medium fitting (wide not available), you must contact the factory to order by telephone or email - it is not possible to purchase online*

Widths: Medium and wide ex stock (size 14 not available in wide fitting)

Weight: 999gms (size 9)

Height: 22.5cms (size 9 – includes heel)

***NOTES ON CE CERTIFICATION CLASSES***

Type 2 Level 3: Public order boot. Provides some protection against slipping and impact to toe area.  Some protection against low energy impacts to remainder of foot, and against thermal hazards.

SB: Safety basic requirements: Impact protection provided is 200 joules; Compression protection provided is 15,000 newtons. 

S1: Closed seat region, antistatic properties, energy absorption at the seat region

S2: As S1 plus - Water penetration and absorption of the upper

S3: As S2 plus - penetration resistance, cleated outsole

WRU: Water repellent Upper

FRU: Flame Resistant Upper

HRO: Heat Resistant Outsole (300°C)

SRA: Slip Resistance on ceramic tile floor with sodium lauryl sulphate solution

SRB: Slip Resistance on steel floor with glycerol

SRC: Slip Resistance on ceramic tile floor with sodium lauryl sulphate solution and on steel floor with glycerol


 

Leder-Gris Original or Leder-Glӧs High Shine

Colour – Black or Clear

Apply with a brush

After 1 minute, brush vigorously with same brush

Leather does not have to be completely dry before applying Leder-Gris®.  Leder-Gris® may still be applied when leather is a little damp

If leather is constantly going through a cycle of wet and dry, or if there are signs of ‘leather hardening’, which can lead to ‘flex cracking’ – apply an occasional, ‘one-off’ treatment of Leder-Gris Xtreme

Delivery of boots, if they are available ex-stock is 5-7 days.  If your size is temporarily out of stock, then delivery will usually be between 2 and 8 weeks – please check with the factory if your requirement is urgent.

Delivery and Returns Policy

Terms and Conditions

**********************************************************************************

Please note:  www.altberg.co.uk is not a 'live' site - it does not automatically check stock levels at the factory, and placing an order does not mean it is in stock.  Once we receive your order, we will contact you to advise the anticipated despatch date.  If you need to check delivery times or stock levels before placing an order, please contact the factory direct.

£125.00

x
Add to cart